Critical
0 accepted
Anything that could harm the user or breaks food-safety rules.
- Mould or insect damage
- Cracks or sharp splinters
- Wrong or unapproved material
Wood is a natural material, so quality cannot be left to the final inspection. We check it at five points, record every result and share the reports with you before the goods leave Vietnam.
Every order follows the same path. Each checkpoint has its own inspector, checklist and sign-off, so a problem is caught where it starts.
IQC · Incoming
On arrival, before storage
Each timber lot is checked against its origin documents and tagged. Oils, glues and packaging are checked against approved suppliers.
RecordLot tag and intake sheet
PPC · Pre-production
Before cutting starts
Your approved sample is sealed as the golden reference. You and our production and QC teams agree on tolerances and critical points.
RecordPre-production meeting checklist
IPQC · In-process
At machining, sanding and finishing
Inspectors walk the line every shift and pull pieces from each station. Defects are fixed at the station that caused them, not at the end.
RecordHourly station checks and weekly photo report
FQC · Final
When the order is 100% packed
A random sample is drawn from the packed goods according to ISO 2859-1 (ANSI Z1.4), General Inspection Level II, and inspected against the defect levels below.
RecordFinal inspection report with photos
LSC · Loading
On shipping day
The container is checked before loading, cartons are counted in, moisture absorbers are added and the container is sealed in front of our camera.
RecordLoading photos and seal number
Default standards for every order. If your QA manual is stricter, we work to yours.
| Check | Standard | Method | When |
|---|---|---|---|
| Moisture content | 8–12% | Pin-type moisture meter | Every lot, in-line, final |
| Dimensions | ±1 mm (±2 mm over 40 cm) | Calipers and tape against drawing | In-line, final |
| Surface | Smooth, no splinters or sanding marks | Visual and touch under daylight lamp | In-line, final |
| Glue joints | No gaps or open joints | Visual check and water-soak test | In-line, final |
| Finish | Even, fully cured, no sticky spots | Visual and wipe test | In-line, final |
| Mould & odour | None | Visual and smell check | Final, loading |
| Branding | Position ±1 mm, sharp and legible | Template and visual | In-line, final |
| Packaging | Correct barcode, labels and carton marks | Barcode scanner, carton drop test | Final |
Final inspection classifies every defect in one of three levels. A lot that exceeds any limit is reworked and inspected again before shipping.
Critical
0 accepted
Anything that could harm the user or breaks food-safety rules.
Major
AQL 2.5
Defects a customer would notice and may return the product for.
Minor
AQL 4.0
Small cosmetic points that do not affect use or sale.
Products that touch food are tested by SGS, an independent laboratory, to the rules of your market. Reports are issued in your company name on request.
FDA food-contact requirements (21 CFR) for coatings and finishes.
Regulation (EC) 1935/2004 and German LFGB sensory and migration tests.
Food Sanitation Act standards for utensils, containers and packaging.
Standards and specifications for food utensils, containers and packaging.
Food-contact material checks and timber treatment records for import clearance.
Formaldehyde emission and heavy-metal tests for panels, glues and coatings.
Our current laboratory reports. Full copies are shared with buyers on request.
Awaiting results
Approval sheet with the golden sample, weekly production photos, the final AQL report, SGS test reports and loading photos, shared by email. Third-party inspection by SGS, Intertek, Bureau Veritas or QIMA is welcome.